Note: 
- Gopro camera and battery are not included. 

GPS Version, Cliquez ici

Journal des modifications :
August 2021: The color of 915 antenna mount changed from green to black, change the foam inner packaging to blister material.
August 2021: Before two antennas changed to one.
October 2021: Before SucceX-E mini F7 Stack(F7 45AESC) changed to BLITZ MINI (F7 BLITZ E55 4-in-1 ESC)
November 2021:  TPU color is random, you may receive yellow, pink, blue, green, or blackish green.
20 juin 2022 : Passage au système numérique CADDX Nebula Pro Vista

DESCRIPTION DU PRODUIT
The Secret Of Ultimate Performance Is Passion
That was the slogan for our newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics we can offer. Months of engineering went into this BNF and all the lessons learned before, making sure that beginners, as well as experienced pilots, would fully enjoy using the new Nazgul Evoque from the first second they use it.
Lightweight Side Panels - Keep Your Rig Clean
Vous êtes-vous déjà senti comme une tondeuse à gazon coupant l'herbe à vos débuts, des accessoires coupant et jetant de l'herbe humide partout et à l'intérieur de votre pile de vol ? Eh bien... Ces jours sont révolus ! Les nouveaux panneaux latéraux protégeront non seulement de l'humidité, mais protégeront également les composants internes de toute frappe frappant les petits composants de votre contrôleur de vol. 
Secured Integrated XT60 Battery Plug - As Safe, It Can Be
Dangling battery plugs will ALWAYS find a way in your props, there's always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.
High-Performance Electronics - F7 55A Power Stack
Notre Contrôleur de vol BLITZ Mini F7 with modern USB type-C plug, 16MB BlackBox, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the gods with our new BLITZ Mini E55 55A ESC packed with better heat-dissipating Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise, besides the pre-soldered directly installed 
Capacitor right next to your battery leads.
XING2 Performance Motors - The Best Motors Just Got Better
7075 aluminum bell, 5mm titanium alloy shaft, NSK durable bearings, Center slotted magnets for better response, and lower air gaps for a higher magnetic flux with increased performance and efficiency. Not to mention the typical XING damping ring between the bell and bearing to increase durability and smoothen out your flights. 
Illumination - Let It Be Green
360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and gives you some style at the next night's race.

Caractéristiques:
Marque : iFlight 
Item Name: Nazgul5 Evoque F5D HD 4S / 6 FPV Racing Drone
Total Dimensions: 136*190mm (body dimension)
Distance de bas en haut : 28 mm
Épaisseur du bras : 6 mm
Épaisseur de la plaque inférieure : 3 mm
Épaisseur de la plaque supérieure : 3 mm
Épaisseur de la plaque supérieure (moyenne): 3 mm
XING2 2207 motors (4S/6S) 
Nazgul F5 propellers
Weight: 412g (without battery and GoPro mount)

FC // BLITZ Mini contrôleur de vol F7 ( Lien)
MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip:  AT7456
Flash: 16MB (Blackbox flash)
UART : 6
Motor outputs:   4x (SH1.0 connector)
I2C serial:   SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller:   Yes
Beeper pad:   Yes
Firmware target:   IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
Dimensions: 30.5x27 mm
Poids : 5g

ESC // BLITZ Mini E55 ESC ( Lien)
Prend en charge l'entrée lipo 2-6S
MCU：G071
Constante : 55 ampères 
Ra